Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1024 / 1488

■
generic—Displays only generic labels
■
atm—Displays only ATM VPI/VCI labels
■
local—Displays only local labels
■
remote—Displays only remote labels
■
atm—Displays the specified ATM VPI/VCI labels
■
vpi —Specifies ATM VPI that partially designates a label
■
vci —Specifies ATM VCI that partially designates a label
■
explicit-null-label—Displays binding information for the explicit null label
■
implicit-null-label—Displays binding information for the implicit null label
■
labelNumber —Label for which binding information is displayed; number in the
range 16–1048575
■
labelRangeEnd —Label designating the high end of a range of labels for which
binding information is specified; number in the range 16–1048575
■
brief—Displays limited information
■
filter —See Filtering show Commands on page 4
■
layer2-vc—Displays binding information for layer 2 over MPLS
■
vcType —One of the following types of virtual circuit over MPLS for which binding
information is displayed: aal5-vcc, ethernet, frame-relay, vlan
■
vcId —Virtual circuit identifier, number in the range 1–4294967295
Mode
Privileged Exec, User Exec
982 ■
show ldp binding
JUNOSe 11.1.x Command Reference Guide N to Z