Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 196 / 1488

path ds3 description
Syntax
path pathChannel ds3 ds3Channel description name
no path pathChannel ds3 ds3Channel description
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a text description or an alias to a DS3 signal. This command applies to a DS3
over channelized SONET/SDH interface. Use the
show controllers sonet command
to display the text description. The no version removes the description or alias.
Options
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
■
ds3Channel —Number, in the range 1–3, that identifies the path
■
name —Text string or alias of up to 80 characters for the T3 over channelized
SONET/SDH interface
Mode
Controller Configuration
154 ■
path ds3 description
JUNOSe 11.1.x Command Reference Guide N to Z