Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1410 / 1488

tunnel-server
Syntax
[ no ] tunnel-server interfaceSpecifier
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies the location of a dedicated or shared tunnel-server port on a module and
accesses Tunnel Server Configuration mode, which enables you to provision the
maximum number of tunnel-service interfaces to be used on the tunnel-server port.
The
default version restores the default configuration. On dedicated tunnel-server
ports, the default configuration is the maximum number of tunnel-service interfaces
that the tunnel-service module supports. On shared tunnel-server ports, the default
configuration is zero tunnel-service interfaces provisioned. The
no version
unprovisions the tunnel-server port by reducing the number of provisioned
tunnel-service interfaces to zero.
Options
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see “Interface Types and Specifiers” on page 5; port number specified must
have the tunnel-server port assigned to it
Mode
Global Configuration
Related Topics
■
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
1368 ■
tunnel-server
JUNOSe 11.1.x Command Reference Guide N to Z