Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 289 / 1488

pppoe max-session-vsa
Syntax
pppoe max-session-vsa { override | ignore }
no pppoe max-session-vsa override
Release Information
Command introduced in JUNOSe Release 9.3.0.
Description
Configures the PPPoE application to override the current PPPoE maximum session
value set with the
pppoe sessions command with the PPPoE maximum session value
returned by the RADIUS server in the Max-Clients-Per-Interface VSA [26-143] in
Access-Accept messages. The
no version restores the default behavior, which ignores
the PPPoE maximum session value returned by RADIUS.
NOTE: The router never overrides the maximum number of PPPoE subinterfaces
supported per line module with a value from RADIUS that is either 0 (zero) or greater
than the maximum number of supported PPPoE subinterfaces. See
JUNOSe Release
Notes, Appendix A, System Maximums corresponding to your software release for
information about the maximum number of PPPoE subinterfaces supported for each
line module.
Mode
Interface Configuration, Profile Configuration, Subinterface Configuration
pppoe max-session-vsa
■ 247
Chapter 4: P Commands