Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 46 / 1488

Deprecated Commands
A command that has been deprecated in a release or in a particular configuration
mode returns a notice when you issue the command manually:
NOTICE: This command is obsolete. It may be completely removed from a subsequent
software release.
A preferred alternate command is provided in the notice. If you have a script that
uses the deprecated command, the deprecated command is automatically mapped
to the preferred command when you run the script. If the deprecated command no
longer has a function, then that command has no effect when you run a script
containing the command.
We recommend that you use the preferred command when writing new scripts.
Filtering show Commands
You have access to a variety of show commands that display router and protocol
information. You can filter the output of a show command by specifying | (the UNIX
pipe symbol), one of the following keywords, and either a case-sensitive text string
or a regular expression.
■
begin —Displays output beginning with the first line that contains the text string
or regular expression
■
include —Displays output lines that contain the text string or regular expression
and excludes lines that do not contain the text string or regular expression
■
exclude —Displays output lines that do not contain the text string or regular
expression and excludes lines that do contain the text string or regular expression
You can press Ctrl+c to interrupt the show command output.
NOTE: The router does not recognize beginning spaces of the text string. For example,
if you enter the include option with IP as the text string on which to filter, the router
ignores the space and displays lines that include words such as RIP.
Example
In the following example, the output display consists only of lines that contain the
string
ip . The router omits all other lines of the output from the display because none
of them contain the string ip .
host1# show config include-defaults | include ip
! Configuration script generated on FRI NOV 12 1999 16:56:41 UTC
ip address 192.168.1.229 255.255.255.0
ip rip receive version 2 1
ip rip send version 1
ip rip authentication mode md5 17
ip rip authentication key
ip route 10.6.0.0 255.255.0.0 192.168.1.1
ip route 10.10.0.0 255.255.0.0 192.168.1.1
4 ■
Deprecated Commands
JUNOSe 11.1.x Command Reference Guide N to Z