Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 421 / 1488

reload
Syntax
reload [ reason | force [ reason ] | in inTime [ reason ] |
at atTime [ month day | day month ] [ reason ] | cancel | standby-srp ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Reloads the operating system in the designated interval or at the designated time.
There is no
no version.
NOTE: Reloading the standby SRP module causes high availability to be temporarily
disabled until the standby SRP module reloads and resynchronizes with the active
SRP module.
Options
■
reason —Reason for the reload (1–255 characters long)
■
force—Prompts for confirmation to reboot if the router is in certain states, such
as during the synchronization of SRP modules, that could lead to a loss of
configuration data or an NVS corruption.
■
inTime —Interval in minutes or hours and minutes ([ hh : ] mm ) at the end of
which the operating system is reloaded. If the router is in a state at that time
that could lead to a loss of configuration data or an NVS corruption, the reload
is automatically delayed for one minute, up to five times. If the router cannot
reload on its sixth attempt, the scheduled reload fails.
■
atTime —Time ( hh : mm using a 24-hour clock) at which the software is reloaded.
If you specify the month and day, the reload takes place at the specified time
and date. If you do not specify the month and day, the reload takes place at the
specified time on the current day (if the specified time is later than the current
time) or on the next day (if the specified time is earlier than the current time).
Specifying 00:00 schedules the reload for midnight. If the router is in a state at
that time that could lead to a loss of configuration data or an NVS corruption,
the reload is automatically delayed for one minute, up to five times. If the router
cannot reload on its sixth attempt, the scheduled reload fails.
■
month —Name of the month (any number of characters in a unique string)
■
day —Number of the day of the month, in the range 1–31
■
cancel—Cancels a scheduled reload
■
standby-srp—Reloads the standby SRP module without having to look up its slot
number to use with the
reload slot command
Mode
Privileged Exec
reload
■ 379
Chapter 6: R Commands