Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1285 / 1488

svlan ethertype
Syntax
svlan ethertype ethertypeValue
no svlan ethertype
Release Information
Command introduced before JUNOSe Release 7.1.0.
88a8 keyword added in JUNOSe Release 7.1.0.
Description
In Interface Configuration mode, specifies the Ethertype of an S-VLAN. The no version
restores the default value, 9100.
In Profile Configuration mode, specifies the available Ethertypes that the packet must
use to create a dynamic VLAN subinterface. The
no version restores the default value,
autoconfig.
Options
ethertypeValue —One of the following Ethertype values:
■
■
8100—Specifies Ethertype value 0x8100, as defined in IEEE Standard 802.1q
■
88a8—Specifies Ethertype value 0x88a8, as defined in draft IEEE Standard
802.1ad
■
9100—Specifies Ethertype value 0x9100, which is the default for Interface
Configuration mode
■
autoconfig—Specifies in a VLAN profile that the packet can use any Ethertype
to create a dynamic VLAN subinterface; this is the default for Profile
Configuration mode
Mode
Interface Configuration, Profile Configuration
Related Topics
■
Configuring S-VLAN Tunnels for Layer 2 Services in the JUNOSe BGP and MPLS
Configuration Guide
svlan ethertype
■ 1243
Chapter 7: S Commands