Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1465 / 1488

write core
Syntax
write core [ standby-srp | slot slotNumber ] [ force ] [ reason reasonText ]
Release Information
Command introduced in JUNOSe Release 7.3.0.
Description
Reboots the active SRP module, the standby SRP module, or the module in a specified
slot, and writes the core dump to a file. There is no
no version.
Options
■
standby-srp—Specifies the standby SRP module
■
slotNumber —Number of a selected slot in the router; for ERX7xx models, a
number in the range 0–6; for ERX14xx models, a number in the range 0–13;
for the ERX310 router, a number in the range 0–2; for the E120 router, a number
in the range 0–5; for the E320 router, a number in the range 0–16
■
force—Prompts for confirmation to reboot when the router is in certain states,
such as during the synchronization of SRP modules, that can lead to a loss of
configuration data or an NVS corruption
NOTE: The force keyword is available when you specify a slot only if that slot is an
SRP module slot.
■
reasonText —Alphanumeric text string (1–255 characters long) that explains the
request for a core dump and logs it in the reboot
Mode
Privileged Exec
write core
■ 1423
Chapter 9: U, V, W, and Y Commands