Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 79 / 1488

neighbor distribute-list
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list
accessListName { in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list
[ accessListName ] { in | out }
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Distributes BGP neighbor information as specified in an access list. The no version
removes an entry.
Using distribute lists is one of several ways to filter BGP advertisements. You can
also use route maps or use AS-path filters, as with the
ip as-path access-list Global
Configuration command and the neighbor filter-list command.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
accessListName —String of up to 32 alphanumeric characters identifying an access
list
■
in—Applies list to incoming routes (inbound policy)
■
out—Applies list to outgoing routes (outbound policy); you cannot configure a
member of a peer group to override the inherited peer group characteristic for
outbound policy
Mode
Address Family Configuration, Router Configuration
neighbor distribute-list
■ 37
Chapter 2: N Commands