Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1319 / 1488

tcp path-mtu-discovery
Syntax
[ ip ] tcp path-mtu-discovery [ vrf vrfName ] [ age-timer [ indefinite | minutes
[ minutes_2 ] ] | max-mtu maxMtu | min-mtu minMtu | black-hole-detect-threshold
blackHoleThreshold }
no [ ip ] tcp path-mtu-discovery [ vrf vrfName ] [ age-timer | max-mtu | min-mtu |
black-hole-detect-threshold }
Release Information
Command introduced before JUNOSe Release 7.1.0.
ip keyword made optional in JUNOSe Release 7.2.0.
Description
Enables and configures path MTU discovery on the virtual router. Issuing the
command without any keywords enables path MTU discovery. Using the keywords
with the command configures specified values. The
no version, when issued with a
keyword, deletes the value. When issued without any keywords, the no version
disables path MTU discovery on the virtual router.
Options
■
ip—Optional keyword for use with older scripts
■
vrfName —Name of the VRF; string of 1–32 alphanumeric characters
■
indefinite—Disables aging functions. That is, TCP does not attempt to increase
the path MTU; the path MTU decreases only in response to received ICMP Too
Big messages.
■
minutes —Time (in minutes) that TCP waits after receiving an ICMP Too Big
message before attempting to increase the path MTU. The timer range is 1–30
minutes.
■
minutes_2 —Time (in minutes) that TCP waits after a successful path MTU increase
before attempting to increase it again. The timer range is 1–30 minutes.
■
maxMtu —Maximum MTU size that the virtual router can accept; number, in the
range 68–65535; default value is no limit
■
minMtu —Minimum MTU value that the virtual router can accept; number, in the
range 68–65535; default value is no limit
■
blackHoleThreshold —Black hole threshold value that you want all connections
on this virtual router to use. The range is 0–65535.
Mode
Router Configuration
tcp path-mtu-discovery
■ 1277
Chapter 8: T Commands