Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1023 / 1488

show ldp binding
Syntax
For MPLS binding information:
show [ mpls ] ldp { [ ip ] binding | binding ip }
[
destAddr [ maskLength | maskAddress ] [ longer-prefixes ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
For layer 2 over MPLS binding information:
show [ mpls ] ldp binding layer2-vc [ vc-type vcType [ vc-id vcId ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
explicit-null-label keyword and optional mpls keyword added in JUNOSe Release
7.2.0.
Description
Displays label bindings from the MPLS label information base. This command displays
the same output as the
show mpls binding command.
Options
■
mpls—Specifies optional keyword for compatibility with non–E Series
implementations
■
ip—Specifies optional keyword for compatibility with non–E Series
implementations when placed before the
binding keyword; when present (either
before or after this keyword) displays label binding information only for IP
prefixes
■
destAddr —Destination address for which you want information displayed; if not
specified, displays all destinations
■
maskLength —Prefix length for the destination address
■
maskAddress —Address mask to be applied to the destination address
■
longer-prefixes—Displays information for prefixes that are equal to or more
specific than the specified prefix
■
interface—Displays labels associated with the specified interface
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
■
ipAddress —Displays labels associated with the specified neighbor
show ldp binding
■ 981
Chapter 7: S Commands