Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 320 / 1488

profile vlan override bulk-config
Syntax
To configure an override for a single-tagged VLAN ID:
profile vlan override bulk-config bulkConfigName vlan vlanIdValue overrideProfileName
To configure an override for a double-tagged S-VLAN ID:
profile vlan override bulk-config
bulkConfigName
svlan s-
vlanIdValue
{ vlanIdValue | any } overrideProfileName
To remove the profile override assignment:
no profile vlan override bulk-config bulkConfigName { svlan s-vlanId | vlan }
{ vlanId | any }
Release Information
Command introduced in JUNOSe Release 7.1.0.
bulk-config keyword and bulkConfigName variable added in JUNOSe Release 7.3.0.
Description
Assigns an overriding profile to a single-tagged VLAN ID or double-tagged S-VLAN ID
that exists within a VLAN subrange previously configured with the
vlan bulk-config
command. The profile vlan override bulk-config command enables you to assign
a special profile for the subscribers associated with a specific DSLAM. After the
overriding profile is assigned, it is used instead of the previously assigned base profile
to create any VLAN dynamic subinterface columns over the specified VLAN ID or
double-tagged S-VLAN ID. The
no version removes the overriding profile assignment
for the VLAN ID or double-tagged S-VLAN ID and restores the original base profile
assignment.
Options
■
bulkConfigName —Name of the VLAN range; string of up to 80 characters
■
s-vlanIdValue —S-VLAN ID number, in the range 0–4095
■
vlanIdValue —VLAN ID number, in the range 0–4095
■
overrideProfileName —Name of the profile for which you want to assign an override
■
any—Specifies the VLAN ID as a wildcard
Mode
Interface Configuration
278 ■
profile vlan override bulk-config
JUNOSe 11.1.x Command Reference Guide N to Z