Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 92 / 1488

neighbor next-hop-unchanged
Syntax
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
next-hop-unchanged
Release Information
Command introduced in JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Configures BGP to not modify the next hop sent to the BGP peer. Outbound route
maps take precedence over this command, enabling prefixes that match the route
map to be modified, regardless of this command. The
no version reenables BGP to
modify the next hop. The default version removes the explicit configuration from
the peer or peer group and reestablishes inheritance of the feature configuration.
Options
ipAddress —IP address of BGP neighbor
■
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
Mode
Address Family Configuration
50 ■
neighbor next-hop-unchanged
JUNOSe 11.1.x Command Reference Guide N to Z