Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1418 / 1488

type
Syntax
To configure the RTR operation:
[ no ] type rtrType protocol ipIcmpEcho destination
[ source-ipaddr srcAddr | source interfaceType interfaceSpecifier ]
To specify the L2TP tunnel type:
type tunnelType
no type
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
From RTR Configuration mode, configures an RTR operation. The no version removes
the configured type from the operation and resets all configuration for an RTR index.
NOTE: You must configure the operation’s type before you can configure any other
characteristics of the operation.
From Domain Map Configuration and Tunnel Group Tunnel Configuration modes,
specifies the L2TP tunnel type (RADIUS attribute 64, Tunnel-Type).
Options
rtrType —One of the following types of operation:
■
■
echo—Performs end-to-end operation only
■
pathEcho—Discovers a path to the destination and echoes each device on
the path
■
destination —IP address or an IP hostname or domain name
■
srcAddr —Source IP address
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
tunnelType —L2TP tunnel type
Mode
Domain Map Configuration, RTR Configuration, Tunnel Group Tunnel Configuration
1376 ■
type
JUNOSe 11.1.x Command Reference Guide N to Z