Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 519 / 1488

set dhcp relay assign-giaddr-source-ip
Syntax
[ no ] set dhcp relay assign-giaddr-source-ip
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Configures DHCP relay and DHCP relay proxy to assign the gateway IP address
(giaddr) to the source IP address of traffic they send to DHCP servers. The
no version
restores the default, in which the DHCP relay and DHCP relay proxy do not assign
the giaddr to the source IP address.
Mode
Global Configuration
set dhcp relay assign-giaddr-source-ip
■ 477
Chapter 7: S Commands