Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 68 / 1488

neighbor advertise-map
Syntax
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
advertise-map advertiseMapName { exist-map | non-exist-map }
conditionMapName [ seq sequenceNumber ]
Release Information
Command introduced in JUNOSe Release 9.0.0.
Description
Specifies a peer or peer group within the current address family to which routes
specified by the first route map are advertised conditionally, depending on whether
the second route map is matched by some other routes in the BGP routing table. The
no version removes the conditions for advertising the routes to the peer or peer
group. The default version removes the explicit configuration from the peer or peer
group and reestablishes inheritance of the feature configuration.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group all
the members of the peer group inherit the characteristic configured with this
command
■
advertiseMapName —Name of a route map that specifies the routes controlled by
conditional advertisement; no more than 50 advertise maps can be configured
per peer or peer group in an address-family
■
conditionMapName —Name of a route map that specifies the routes that control
conditional advertisement
■
sequenceNumber —Number, in the range 1–65535, that indicates the position an
advertise route map has in the list of advertise route maps configured for a
particular neighbor within the same address family; if the sequence number is
not specified, the position of the route map is considered to be the sum of the
current largest sequence number plus five
Mode
Address Family Configuration
26 ■
neighbor advertise-map
JUNOSe 11.1.x Command Reference Guide N to Z