Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 178 / 1488

path ds1|e1 channel-group shutdown
Syntax
[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber shutdown
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Disables a DS1 or an E1 channel group on channelized SONET and SDH interfaces.
DS1 and E1 channel groups are enabled by default. The
no version restarts a disabled
interface.
Options
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
■
tributaryIdentifier —Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload / tributaryGroup / tributaryNumber
■
pathPayload —Payload number for the path; value is 1 for SONET and in the
range 1–3 for SDH
■
tributaryGroup —Number, in the range 1–7, that identifies the group within
the path
■
tributaryNumber —Number of the tributary within the tributary group; the
value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range
1–3 if the tributary type is tu12
■
channelGroupNumber —Either a fractional T1 interface in the range 1–24 or a
fractional E1 interface in the range 1–31
Mode
Controller Configuration
136 ■
path ds1|e1 channel-group shutdown
JUNOSe 11.1.x Command Reference Guide N to Z