Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1263 / 1488

sscc restart
Syntax
sscc restart [ clean-state ]
Release Information
Command introduced in JUNOSe Release 11.0.0.
Description
Forces the router to restart a COPS connection to, and resynchronize with, the SRC
software, without removing the SRC client. The
no sscc enable cops command
removes the SRC client. There is no no version.
Options
■
clean-state—Enables a complex restart where the SRC client closes the connection
and clears the Policy Information Base (PIB) structures and tables. Then the SRC
client connects to the SRC software, which requests full synchronization, which
restores correct policy and QoS provisioning.
Mode
Privileged Exec
sscc restart
■ 1221
Chapter 7: S Commands