Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 430 / 1488

resource if-type
Syntax
[ no ] resource if-type { atm-active-sub-if | atm-sub-if | atm-vc | ip | ppp-link }
{ slot
slot | system }
threshold { falling fallingValue | hold-down-time holdDownTime | rising
risingValue }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies threshold values for specific interface types on a slot or systemwide basis.
The
no version sets the threshold parameter to its default value (for rising, 90% of
the maximum value of the resource; for falling, 1% of the maximum value of the
resource; for hold-down time, 300 seconds).
CAUTION: Do not specify a falling value larger than the specified rising value; do not
specify a rising value smaller than the specified falling value.
Options
■
atm-active-sub-if—Configures active ATM subinterfaces
■
atm-sub-if—Configures both active and inactive ATM subinterfaces
■
atm-vc—Configures ATM virtual circuits
■
ip—Configures IP interfaces
■
ppp-link—Configures PPP link interfaces
■
slot —Number of the chassis slot in the range 0–2 (ERX310 model), 0–6 (ERX7xx
models), 0–13 (ERX14xx models), 0–5 (E120 router), and 0-16 (E320 router)
■
For ERX7xx models, a number in the range 0–6; for ERX14xx models, a number
in the range 0–13; for the ERX310 router, a number in the range 1–2; for the
E120 router, a number in the range 0–5; for the E320 router, a number in the
range 0–16
■
fallingValue —Falling threshold for the resource, in the range 0–4294967295
■
holdDownTime —Hold-down time for the resource, in the range 0–4294967295
seconds
■
risingValue —Rising threshold for the resource, in the range 0–4294967295
Mode
Global Configuration
388 ■
resource if-type
JUNOSe 11.1.x Command Reference Guide N to Z