Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 362 / 1488

radius ignore
Syntax
radius ignore attributeName { enable | disable }
no radius ignore attributeName
Release Information
Command introduced before JUNOSe Release 7.1.0.
pppoe-max-session keyword added in JUNOSe Release 9.3.0.
Description
Ignores the specified attribute in RADIUS Access-Accept messages. All attributes are
disabled by default except for Framed-Ip-Netmask and Max-Clients-Per-Interface
(pppoe-max-session). The
no version restores the default.
Options
attributeName —One of the following RADIUS attributes:
■
■
atm-mbs—Mbs, VSA 26-17
■
atm-pcr—Pcr, VSA 26-15
■
atm-scr—Scr, VSA 26-16
■
atm-service-category—Service-Category, VSA 26-14
■
egress-policy-name—Egress-Policy-Name, VSA 26-11
■
framed-ip-netmask—Framed-Ip-Netmask, attribute 9
■
pppoe-max-session—Max-Clients-Per-Interface, VSA 26-143
■
ingress-policy-name—Ingress-Policy-Name, VSA 26-10
■
virtual-router—Virtual-Router, VSA 26-1
■
enable—Specifies the feature; this is the default setting for framed-ip-netmask
and pppoe-max-session
■
disable—Disables the feature; this is the default setting for all attributes except
framed-ip-netmask and pppoe-max-session
Mode
Global Configuration
320 ■
radius ignore
JUNOSe 11.1.x Command Reference Guide N to Z