Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 211 / 1488

path ds3 t1 fdl string
Syntax
path pathChannel ds3 ds3Channel t1 t1Channel fdl string { eic eicValue | fic ficValue
| lic licValue | unit unitValue | pfi pfiValue | port portValue |
generator generatorValue }
no path pathChannel ds3 ds3Channel t1 t1Channel fdl string { eic | fic | lic | unit | pfi
| port | generator }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an FDL message for a T1 channel on a DS3 signal, as defined in the ANSI
T1.403 specification. This command applies to a T1 channel on a DS3 over
channelized SONET interface. Currently, FDL strings can only be configured locally.
The
no version restores the default value to the specified FDL message or to all FDL
messages.
Options
■
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
ds3Channel —Number, in the range 1–3, that identifies the DS3 channel
■
t1Channel —One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
■
eicValue —Equipment identification code; 1–10 characters; default value is the
null value
■
ficValue —Frame identification code; 1–10 characters; default value is the null
value
■
licValue —Line identification code; 1–10 characters; default value is the null value
■
unitValue —Unit identification code; 1–6 characters; default value is the null value
■
pfiValue —Facility identification code to send in the FDL path message; 1–38
characters; default value is the null value
■
portValue —Equipment port number to send in the FDL idle signal message; 1–38
characters; default value is the null value
■
generatorValue —Generator number to send in the FDL test signal message; 1–38
characters; default value is the null value
Mode
Controller Configuration
path ds3 t1 fdl string
■ 169
Chapter 4: P Commands