Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 899 / 1488

show ip route
Syntax
show ip route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ]
[ filter ]
To display summary information:
show ip route summary [ vrf vrfName ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Displays current state of the routing table.
Options
■
vrfName —Displays the contents of the IP routing table associated with a VRF
■
destination —Specifies the IP address or domain name of the host to show
■
ipMask —IP mask of the specific address to show
■
detail—Displays detailed information about the specific prefix; currently shows
the tag added by means of the
ip route command
■
all—Displays all routes in the routing table inserted from all protocols (not just
the
best routes that are used for forwarding)
■
protocol —One of the following protocols for which you want to display the best
routes in the routing table; no routes are displayed if routes for the specified
protocol are not present in the routing table
■
access—Displays the best access-server routes (BGP) in the routing table
■
access-internal—Displays the best access-internal routes in the routing table
■
bgp—Displays the best BGP routes in the routing table
■
bgp-tunnel—Displays the best BGP tunnel routes in the routing table
■
dvmrp—Displays the best DVMRP routes in the routing table
■
isis—Displays the best IS-IS routes in the routing table
■
ldp—Displays the best LDP tunnel routes in the routing table
■
local—Displays the best locally connected routes in the routing table
■
mbgp—Displays the best MBGP routes in the routing table
■
ospf—Displays the best OSPF routes owned by in the routing table
■
other—Displays the best internal control routes in the routing table
■
rip—Displays the best RIP routes in the routing table
■
rsvp—Displays the best RSVP tunnel routes in the routing table
show ip route
■ 857
Chapter 7: S Commands