Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 415 / 1488

redundant-port
Syntax
To specify a member interface with optional failover timeout and packet sampling
settings:
[ no ] redundant-port interfaceType interfaceSpecifier [ [ failover timeout
failoverTime ] [ packet-sampling [ delay delayTime ] ] ]
To specify a member interface with optional auto-reversion, transmitter, and failover
timeout settings:
[ no ] redundant-port interfaceType interfaceSpecifier [ [ auto-revert ] [ transmitter {
on | off } ] [ failover timeout failoverTime ] ]
Release Information
Command introduced in JUNOSe Release 8.0.0.
Description
Specifies a member link of a LAG bundle as redundant. The no version disables the
redundant status of the member link or disables the specified redundancy setting
for the member link.
Options
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
failoverTime —Time between the current link event leading to failover or reversion
and the previous link failover or reversion, in the range 100-10000 milliseconds
(ms). The default value is 1000 milliseconds.
■
packet-sampling—Enables packet sampling to determine a failed port. By default,
packet sampling is disabled.
■
delayTime —Minimum time difference between redundant and active port
samples, in the range 100–10000 milliseconds (ms). The default value is 0
millisecond.
■
auto-revert—Specifies that the failed port automatically resumes as active. By
default, auto revert is disabled.
■
on—Specifies the transmitter is enabled when port is in redundant mode
■
off—Specifies the transmitter is disabled when port is in redundant mode
Mode
Global Configuration
redundant-port
■ 373
Chapter 6: R Commands