Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 773 / 1488

show ip bgp neighbors dampened-routes
Syntax
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn [ all ] | route-target signaling ]
neighbors {
ipAddress | ipv6Address }
dampened-routes [ fields fieldOptions ] [ delta ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Displays information about routes with a dampening history for the specified BGP
neighbor.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
l2vpn—Displays information for only the L2VPN address family
■
all—Optional keyword; has no effect
■
route-target signaling—Displays information for only the route-target address
family
■
ipAddress —IP address of a neighbor whose routes the router has learned
■
ipv6Address —IPv6 address of a neighbor whose routes the router has learned
■
fields—Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
■
fieldOptions —Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
■
all—All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
■
afi—Address family identifier
■
aggregator—AS number and IP address of aggregator
■
as-path—AS path through which this route bas been advertised
■
atomic-aggregate—Whether the atomic aggregate attribute is present
show ip bgp neighbors dampened-routes
■ 731
Chapter 7: S Commands