Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1268 / 1488

sscc update-policy-request enable
Syntax
[ no ] sscc update-policy-request enable
Release Information
Command introduced in JUNOSe Release 9.3.0.
Description
Configures the router to collect updated DSL line rate parameters from an access
node using the ANCP topology discovery message and transmit the information to
the COPS server with corresponding COPS messages. If you enable this feature, the
access node sends line rate parameters not only during connection establishment,
but also whenever any of the line rate values changes after the connection is built.
The
no version restores the default, which disables line rate parameters to be sent
to the COPS server.
NOTE: When you configure the sscc update-policy-request enable command, a
warning message is displayed, prompting you to confirm whether you want to enable
the router that functions as the SRC client to forcibly send updated line rate
information parameters to the COPS server, which is running a release of SRC
software earlier than Release 3.0.0 that is not compatible with the line rate message
format.
Mode
Global Configuration
Related Topics
Configuring the SRC Client in the JUNOSe Broadband Access Configuration Guide
■
■
Retrieval of DSL Line Rate Information from Access Nodes Overview
1226 ■
sscc update-policy-request enable
JUNOSe 11.1.x Command Reference Guide N to Z