Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 344 / 1488

queue
Syntax
[ no ] { typeOfInterface | set | superset } queue traffic-class trafficClassName
[ queue-profile queueProfileName [ scheduler-profile schedProfileName ] |
scheduler-profile schedProfileName [ queue-profile queueProfileName ] ]
[ drop-profile dropProfileName ] [ statistics-profile statisticsProfileName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
svlan keyword added in JUNOSe Release 7.1.0.
set and superset keywords added in JUNOSe Release 9.2.0.
Description
Specifies that a queue traffic class be configured for the selected interface type. The
no version removes this rule from the QoS profile.
Options
■
typeOfInterface —Interface type for queue traffic classes to be configured; atm,
atm-vp, atm-vc, bridge, ethernet, fr-vc, ip, ipv6, ip-tunnel, l2tp-session, l2tp-tunnel,
lsp, serial, server-port, svlan, vlan
■
set—Configures a queue for an interface set
■
superset—Configures a queue for an interface superset
■
trafficClassName —Name of the traffic class
■
queueProfileName —Name of the queue profile
■
schedProfileName —Name of the scheduler profile
■
dropProfileName —Name of the drop profile
■
statisticsProfileName —Name of the statistics profile
Mode
QoS Profile Configuration
Related Topics
■
Configuring a QoS Profile
■
Configuring Shadow Nodes
■
Configuring a Basic Parameter Definition for QoS Administrators
■
Configuring Rate Statistics
■
Configuring Event Statistics
■
Attaching a QoS Profile to an Interface Superset or an Interface Set
302 ■
queue
JUNOSe 11.1.x Command Reference Guide N to Z