Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 213 / 1488

path ds3 t1 framing
Syntax
path pathChannel ds3 ds3Channel t1 t1Channel framing framingType
no path pathChannel ds3 ds3Channel t1 t1Channel framing
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Configures the framing format for a T1 channel on a DS3 signal. This command
applies to a T1 channel on a DS3 over channelized SONET interface. The
no version
restores the default value.
Options
■
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
ds3Channel —Number, in the range 1–3, that identifies the DS3 channel
■
t1Channel —One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
■
framingType —One of the following types:
■
esf—Default; specifies extended superframe
■
sf—Specifies superframe
Mode
Controller Configuration
path ds3 t1 framing
■ 171
Chapter 4: P Commands