Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 405 / 1488

redistribute { fromProtocol | ospf match internal } | metric-type { 1 | 2 }
[ metric absoluteValue | tag tagValue | route-map mapTag ]*
no redistribute { fromProtocol | ospf match internal } | metric-type [ 1 | 2 ]
[ metric [ absoluteValue ] | tag [ tagValue ] | route-map [ mapTag ] ]*
[ no ] redistribute ospf
{ match internal external [ 1 | 2 ] | match external [ 1 | 2 ] [ internal ] }
[ metric [
absoluteValue ] | route-map [ mapTag ] | tag [ tagValue ] ]*
For RIP:
redistribute { fromProtocol | ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] } [ metric absoluteValue |
route-map mapTag ]*
no redistribute { fromProtocol | ospf match internal } [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] } [ metric [ absoluteValue ] |
route-map [ mapTag ] ]*
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Redistributes routes from one routing domain into another routing domain. For
DVMRP, only routes that appear in the RPF table can be redistributed. The
no version
ends redistribution of information.
Options
fromProtocol —Source protocol from which routes are being redistributed; default
value is no source protocol defined
■
■
access—Redistributes access-server routes (framed routes sourced by AAA)
■
access-internal—Redistributes internal host routes to directly connected
clients
■
bgp—Routes sourced from BGP protocol
■
connected—Routes that are established automatically when IP is enabled
on an interface (non-multicast routing protocols). For routing protocols such
as OSPF and IS-IS, these routes are redistributed as external to the AS. When
you specify the
connected keyword, only those connected networks that
are configured on an interface that is not configured to run IS-IS will be
redistributed. For DVMRP, specifying this keyword redistributes routes that
are established automatically in the RPF table when another multicast routing
protocol, such as PIM, is enabled on an interface.
■
dvmrp—Routes sourced from DVMRP
■
isis—Routes sourced from IS-IS
■
ospf—Routes sourced from OSPF
redistribute
■ 363
Chapter 6: R Commands