Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 489 / 1488

service check-config
Syntax
[ no ] service check-config [ auto | fileName fileName | running-configuration |
running-configuration recover | auto-recover ]
Release Information
Command introduced in JUNOSe Release 9.3.0.
auto-recover keyword added in JUNOSe Release 10.3.0.
Description
Detects corruption of running configuration and CNF files on both the primary and
the standby SRP when it is due to a fatal duplicate key error. The
no version restores
the default action, manual detection.
Options
■
auto—Checks the running configuration at regular intervals; cannot be used for
CNF files
■
fileName —Name of an existing configuration file (.cnf) that needs to be validated
for corruption
■
running–configuration—Specifies that the running configuration needs to be
validated for corruption
■
running-configuration recover—Recovers the corrupted configuration files in the
running configuration
■
auto-recover—Specifies that the running configuration needs to be validated for
corruption and the corrupted files need to be recovered
Mode
Global Configuration
service check-config
■ 447
Chapter 7: S Commands