Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1044 / 1488

show mpls binding
Syntax
For MPLS binding information:
show mpls { [ ip ] binding | binding ip }
[
destAddr [ maskLength | maskAddress ] [ longer-prefixes ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
For layer 2 over MPLS binding information:
show mpls binding layer2-vc [ vc-type vcType [ vc-id vcId ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
explicit-null-label keyword added in JUNOSe Release 7.2.0.
Description
Displays label bindings from the MPLS label information base. This command displays
the same output as the
show ldp binding command.
Options
■
ip—Specifies optional keyword for compatibility with non–E Series
implementations when placed before the
binding keyword; when present (either
before or after this keyword) displays label binding information only for IP
prefixes
■
destAddr —Destination address for which you want information displayed; if not
specified, displays all destinations
■
maskLength —Prefix length for the destination address
■
maskAddress —Address mask to be applied to the destination address
■
longer-prefixes—Displays information for prefixes that are equal to or more
specific than the specified prefix
■
interface—Displays labels associated with the specified interface
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
■
ipAddress —Displays labels associated with the specified neighbor
■
generic—Displays only generic labels
■
atm—Displays only ATM VPI/VCI labels
1002 ■
show mpls binding
JUNOSe 11.1.x Command Reference Guide N to Z