Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1074 / 1488

show ppp interface
Syntax
show ppp interface [ interfaceType interfaceSpecifier ]
[ full | { dataRestriction }* [ protocolRestriction ]* ] [ state stateRestriction ]
[ delta ] [ filter ]
For multilinked PPP interfaces, the following options are additionally available:
show ppp interface mlppp [ interfaceSpecifier ] members [ filter ]
show ppp interface mlppp links [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
eap keyword added in JUNOSe Release 7.3.0.
Description
Displays information about the PPP interface type that you specify.
Options
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
full—Displays configuration, status, and statistics information for the interface,
including information specific to LCP, IPCP, OSINLCP, MPLSCP, PAP, and CHAP;
equivalent to specifying
config status statistics
■
dataRestriction —One or more of the following keywords; you can repeat a
keyword without effect
■
config—Displays information about the PPP interface configuration
■
status—Displays information about the PPP interface operational status
■
statistics—Displays information about the PPP interface statistics
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
■
protocolRestriction —One or more of the following keywords
■
eap—Displays EAP-specific information
■
lcp—Displays LCP-specific information
■
ip—Displays IPCP-specific information
■
ipv6—Displays IPv6CP-specific information
■
osi—Displays OSINLCP-specific information
■
mpls—Displays MPLSCP-specific information
■
pap—Displays PAP-specific information
■
chap—Displays CHAP-specific information
1032 ■
show ppp interface
JUNOSe 11.1.x Command Reference Guide N to Z