Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 422 / 1488

reload slot
Syntax
reload slot slotNumber [ subsystem ] [ force ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Reboot the module in the selected slot. You can reboot the subsystems on the SRP
modules on the E120 router or the E320 router separately. There is no
no version.
Options
slotNumber —Number of a selected slot in the router; for ERX7xx models, a
number, in the range 0–6; for ERX14xx models, a number, in the range 0–13;
■
for the ERX310 router, a number, in the range 0–2; for E120 and E320 routers,
a number, in the range 0–16
■
subsystem —Type of subsystem on E120 and E320 routers; use when the specified
slotNumber is a slot that contains an SRP module
■
srp—Indicates the system controller (SC) on one or both SRP modules; specify
this keyword to reboot only the portion of the SC on the individual SRP
module
■
fabric—Indicates the portion of the switch fabric on the SRP modules; specify
this keyword to reboot only an individual fabric slice
■
force—Prompts for confirmation to reboot if the router is in certain states, such
as during the synchronization of SRP modules, that could lead to a loss of
configuration data or an NVS corruption.
Mode
Privileged Exec
380 ■
reload slot
JUNOSe 11.1.x Command Reference Guide N to Z