Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 259 / 1488

ppp hash-link-selection
Syntax
[ no ] ppp hash-link-selection
Release Information
Command introduced in JUNOSe Release 7.2.0.
Description
Enables use of a hash-based algorithm to select the link on which the router transmits
high-priority (non-best-effort) packets, such as voice or video, on an MLPPP interface.
If hash-based link selection is enabled, the router uses the IP source address and IP
destination address of the packet as a hash to select the MLPPP member link on
which to transmit the packet. Using the hash-based algorithm instead of the default
round-robin algorithm for MLPPP link selection ensures that the router maintains
the proper packet order when transmitting high-priority packets. The
no version
restores the default round-robin algorithm for MLPPP link selection.
Mode
Interface Configuration, Profile Configuration, Subinterface Configuration
ppp hash-link-selection
■ 217
Chapter 4: P Commands