Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 604 / 1488

show bgp ipv6
Syntax
To display information about networks in address families other than the route-target
address family:
show bgp ipv6 [ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName ]
ipv6Prefix [ longer-prefixes ] [ fields { fieldOptions } ] [ filter ]
To display information about networks in only the route-target address family:
show bgp ipv6 route-target signaling { rtfPrefix [ longer-prefixes ] | rtfAddress }
[ fields { fieldOptions } ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
route-target signaling keywords and rtMemNlri variable added in JUNOSe Release
8.2.0.
rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix , in JUNOSe
Release 9.1.0.
Description
Displays filtered information about a specified network, or all networks, in the IPv6
BGP routing table. Only those fields that you specify are displayed, except that the
prefix field is always displayed. Default fields can be set with the
default-fields route
command.
Options
■
unicast—Specifies the IPv6 unicast address family and routing table; the default
option
■
multicast—Specifies the IPv6 multicast address family and routing table
■
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
■
vpn6 vrf vrfName —Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
■
ipv6Prefix —Prefix that defines the IPv6 network that you want to filter
■
longer-prefixes—Displays all routes with a prefix that is equal to or more specific
than the specified prefix
■
route-target signaling—Specifies the route-target address family
■
rtfPrefix —Prefix representing the route-target membership NLRI (RT-MEM-NLRI),
in the format asNumber : extendedCommunity / prefixLength (for example,
320:320:524/36) where:
■
asNumber —AS number for origin of route target information, in the range
1–4294967295
■
extendedCommunity —Two-part number in the format number1 : number2 that
identifies an extended community of VPNs, in the format number1 : number2 ,
where:
562 ■
show bgp ipv6
JUNOSe 11.1.x Command Reference Guide N to Z