Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 755 / 1488

show ip bgp cidr-only
Syntax
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
cidr-only [ fields { fieldOptions } ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Displays information only about routes having nonnatural network masks.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
fields—Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
■
fieldOptions —Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
■
all—All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
■
afi—Address family identifier
■
aggregator—AS number and IP address of aggregator
■
as-path—AS path through which this route bas been advertised
■
atomic-aggregate—Whether the atomic aggregate attribute is present
■
best—Whether this is the best route for the prefix
■
clusters—List of cluster IDs through which the route has been advertised
■
communities—Community number associated with the route
■
extended-communities—Extended community
■
imported—Whether the route was imported
■
intro—Introductory information about the state of various BGP attributes;
this information is displayed only if you specify this keyword
■
in-label—MPLS label for the route; the label received with incoming MPLS
frames; typically, but not always, this is the label advertised to MP-BGP peers
show ip bgp cidr-only
■ 713
Chapter 7: S Commands