Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1345 / 1488

timeout
Syntax
RADIUS:
timeout waitTime
no timeout
RTR:
timeout timeoutValue
no timeout
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
When used from RADIUS Configuration mode, specifies the interval, in seconds,
before the router retransmits a RADIUS packet to an authentication or accounting
server. The
no version restores the default.
When used from RTR Configuration mode, specifies the timeout for a Response Time
Reporter operation. The
no version returns the operation to the default value. You
can apply this parameter only to echo entries.
Options
waitTime —Number of seconds in the range 1–1000; default value is 3
■
■
timeoutValue —Number in milliseconds that the operation waits for a response;
if the value is set to 0 or is larger than frequency, it will be ignored; default value
is 5000
Mode
RADIUS Configuration, RTR Configuration
timeout
■ 1303
Chapter 8: T Commands