Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 117 / 1488

■
asNumber —AS number for origin of route target information, in the range
1–4294967295
■
extendedCommunity —Two-part number in the format number1 : number2 that
identifies an extended community of VPNs, in the format number1 : number2 ,
where:
■
number1 —Autonomous system (AS) number, in the range
1–4294967295, or an IP address
■
number2 —Unique integer, in the range 1–4294967295; 32 bits if number1
is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS
number
■
prefixLength —Number that specifies the length of the route prefix, in the
range 32–96
■
mapTag —Name of the route map; a string of up to 32 alphanumeric characters;
does not currently work with rtMemNlri
■
weight —Number in the range 0–65535; default value is 32768; assigns an
absolute weight to the network route that overrides a weight assigned by the
redistribute command
■
backdoor—Lowers the preference of an EBGP route to the specified prefix by
setting the administrative distance to the value of an internal BGP route. Use this
option to favor an IGP backdoor route over an EBGP route to a specific network.
BGP does not advertise the prefix specified with this option.
■
networkAddress —IP address of the network
■
prefix —Network prefix
■
force—Deletes address pool even if the pool is in use
Mode
Address Family Configuration (BGP, RIP), DHCP Local Pool Configuration (for DHCP
local server), Router Configuration (BGP, RIP)
network
■ 75
Chapter 2: N Commands