Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 382 / 1488

radius remote-circuit-id-format
Syntax
radius remote-circuit-id-format { [ nas-identifier ] { agent-circuit-id | agent-remote-id
| agent-circuit-id agent-remote-id } | dsl-forum-1 }
no radius remote-circuit-id format
Release Information
Command introduced before JUNOSe Release 7.1.0.
dsl-forum-1 keyword added in JUNOSe Release 7.2.0.
Description
Specifies the format of the PPPoE remote circuit ID value sent from a DSLAM and
captured on the router. You can format the PPPoE remote circuit ID value to include
either or both of the agent-circuit-ID (suboption 1) and agent-remote-id (suboption 2)
suboptions of the tags supplied by the PPPoE intermediate agent. The
no version
restores the default format, agent-circuit-id.
Options
■
nas-identifier—Formats the PPPoE remote circuit ID value to include the
NAS-Identifier [32] RADIUS attribute with either or both of the agent-circuit-id
and agent-remote-id suboptions. If you include the
nas-identifier keyword, you
must also include either or both of the agent-circuit-id and agent-remote-id
keywords.
■
agent-circuit-id—Formats the PPPoE remote circuit ID value to include only the
agent-circuit-id suboption; this is the default format
■
agent-remote-id—Formats the PPPoE remote circuit ID value to include only the
agent-remote-id suboption
■
agent-circuit-id agent-remote-id—Formats the PPPoE remote circuit ID value to
include both the agent-circuit-id and agent-remote-id suboptions
■
dsl-forum-1—Formats the PPPoE remote circuit ID value to append the
agent-circuit-id suboption value to an interface specifier that is consistent with
the recommended format in the DSL Forum Technical Report (TR)-101—Migration
to Ethernet-Based DSL Aggregation (April 2006).
Mode
Global Configuration
340 ■
radius remote-circuit-id-format
JUNOSe 11.1.x Command Reference Guide N to Z