Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 1358 / 1488

■
timeOutVal —Number of seconds in the range 1–32 to wait for an MPLS echo
reply packet before the connection attempt times out
■
reply mode—Specifies the reply mode for the echo request packet
■
ipv4-udp—Specifies that the echo request packet is an IPv4 UDP packet
■
ipv4-udp-with-router-alert—Specifies that the echo request packet is an IPv4
UDP packet with the router alert bit set in the header so all routers examine
this packet more closely to determine whether further processing is necessary
■
reply pad-tlv—Requests sender of an echo reply to send a pad TLV
■
trafficClass —Number in the range 0–255 that represents the value of the traffic
class that the sender of an echo reply is requested to set
■
bitValue —Value of the EXP bits in the range 0–7 included in the MPLS echo
request packet
■
bottomLabelTtl —Time-to-live value of the bottom label in the stack
■
detail—Displays detailed information about MPLS echo request sent and echo
replies received
Mode
Privileged Exec, User Exec
1316 ■
trace mpls l2transport
JUNOSe 11.1.x Command Reference Guide N to Z