Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Command Reference Manual

Page: 337 / 1488

qos-parameter-define
Syntax
[ no ] qos-parameter-define qosParameterDefinitionName
[ application applicationName ] [ hierarchical ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Specifies a QoS parameter name and accesses QoS Parameter Definition mode. The
no version deletes the QoS parameter definition.
Options
qosParameterDefinitionName —Name of the parameter definition
■
■
applicationName —Name of the application that you want to associate with the
parameter definition:
■
ip-multicast—Specifies the IP multicast bandwidth adjustment application.
You must also specify the
hierarchical keyword when you specify this
application.
■
qos-byte-adjustment—Specifies the cell byte-adjustment application, which
enables you to adjust the shaping rate to account for different layer 2
encapsulations in ADSL configurations. If you have configured the QoS
shaping mode as cell, the system adjusts the shaping rate to account for the
ATM cell pad, header, and trailer.
■
qos-frame-byte-adjustment—Specifies the frame byte-adjustment application,
which enables you to shape traffic based on frames for VDSL configurations.
If you have configured the QoS shaping mode as frame, the system adjusts
the shaping rate based on bytes within frames.
■
qos-cell-mode—Specifies the QoS cell mode application, which enables you
to configure the operational shaping mode (frame or cell) for ATM, Gigabit
Ethernet, or 10-Gigabit Ethernet interfaces.
■
qos-downstream-rate—Specifies the QoS downstream rate application, which
enables you to adjust the downstream rate of VLANs and ATM VCs based
on parameter instances that are created dynamically by ANCP or AAA. The
values of the parameter instances track the bandwidth of the local loop that
are communicated by ANCP.
■
hierarchical—Specifies that the parameter instance is hierarchical. Hierarchical
parameters have explicit instances that are associated with the logical interfaces
of instance-interface types, as well as implicit instances that are associated with
the logical interfaces of controlled-interface types. The system computes the
values of an implicit instance as the sum of the values of the explicit instances
stacked above the implicit instance.
Mode
Global Configuration
qos-parameter-define
■ 295
Chapter 5: Q Commands