289
CX-Position
Software
WS02-NCTC1-E
CX-Position
Set, transfer, store, and print position control unit data and monitor operation online
CCW limit input
CW limit input
Origin input
Origin proximity input
Emergency stop input
Interrupt input
Interface power
supply (24 V)
External inputs
Stepping motors
or
Servo motors
Stepping motor
drivers
CCW limit input
CW limit input
Origin input
Origin proximity input
Emergency stop input
Interrupt input
Interface power
supply (24 V)
External inputs
Stepping motors
Servo motors
Servomotor drivers
NC Unit
(CS1W-NC413/433)
CPU Unit
(CS1 Series)
Power Supply Unit
Peripheral bus/Host Link
System Configuration with CS1W-NC413/433
Servomotor drivers
or
Stepping motor
drivers
CX-Programmer
Creation and transfer
of ladder programs,
monitoring, file
management, etc.
CX-Position
Creation and
transfer of data,
NC Unit
monitoring, file
management, etc.
Increase productivity in all position control tasks, from design and startup to system
maintenance.
Specifications
CS Series:CS1W-NC113/NC133/NC213/NC413/NC433
CJ Series: CJ1W-NC113/NC133/NC213/NC413/NC433
Create, edit, and print the Position Control Unit’s parameter
data,sequence data, speed data, acceleration/deceleration
data, dwell times, and zone data. Monitor the Position Control
Unit’s operating status.
CX-Position project files (*.nci)
Contents: Parameter data, sequence data, speed data,
acceleration/deceleration data, dwell times, and zone data
Compatible
Position Control
Units:
Basic Functions
Created files
Pentium 100 MHz or faster CPU
Windows 95, 98, NT4.0, W2000 or XP
CPU:
OS:
Operating Environment
CS Series and CJ Series
Compatible PLCs:
The CX-Position software simplifies every aspect of position control, from creating/editing the data used in Position
Control Units (NC Units) to communicating online and monitoring operation. The software is equipped with
functions that can improve productivity, such as automatically generating project data and reusing existing data.
The CX-Position enables data for multiple NC Units on up to 1,000 PLCs to
be handled as 1 project. Data is displayed in tree format and the data for an
NC Unit
can be moved or copied (overwritten) between PLCs in the project
tree. This feature allows data to be edited and re-used in other PLCs or NC
Units.
●
The CX-Position can read information from NC Units connected online
and automatically generate project data.
●
Data created for a C200HW-NC
@@@
using the SYSMAC-NCT can be
imported and used as data for the CS1W-NC
@@@
or CJS1W-NC
@@@
.
Data can be created for various applications
It is possible to communicate with NC Units through the Fins-Gateway.
Depending on the FinsGateway driver version, HostLink or Ethernet. can
be used to perform online operations (monitoring operation or
transferring/verifying parameters,sequences, etc.) with the NC Unit.
Communicate with NC units through the network.
The sequence numbers and present positions can be dis-played for up to 4
Units. In addition, the contents of the operating memory area and operating
data area can be monitored and the error log can be displayed.
Display the NC units’ present positions, error codes, sequence
numbers, and I/O status.
Key Features
Creating and managing data
NC Monitor
Communications
Y203-EN2-01.book Seite 289 Montag, 29. März 2004 12:52 12
