IAI Rcon, Instruction Manual, Page: 456 / 838

4.2 Master Side Setting
B4-35
ME0384-4A
St
ar
tu
p
Se
ct
io
n
C
ha
pt
er
4
N
et
w
or
k
C
onf
igu
rat
ion
Set the "CC-Link station information".
Set the occupancy information obtained based on the example.
The RCON system Unit 1 is set to "number of units / station number: 1/1" and the RCON
system Unit 2 to "number of units / station number
→
2/5".
(1) Select the "station type".
Select "Ver.1 remote device station" for "number of units / station number: 1/1" and "Ver.2
remote device station" for "number of units / station number: 2/5".
(2) Perform the "extended cyclic setting".
"Number of units / station number: 1/1" is fixed at "Single". Select "Quadruple" for the
"number of units / station number: 2/5".
"CC-Link station information" screen
Selection
"CC-Link station information" screen
Selection
Occupancy information
By station type : Ver.1
Remote device station
Extended cyclic : 1 x
Number of occupied stations : 4 stations occupied
RCON System Unit 1
Occupancy information
By station type : Ver.2
Remote device station
Extended cyclic : 4 x
Number of occupied stations : 2 stations occupied
RCON System Unit 2
"CC-Link station information" screen
(2) (3) (1)
9