IAI Rcon, Instruction Manual, Page: 387 / 838

2.1 Installation
B2-2
ME0384-4A
C
ha
pt
er
2
M
ount
ing
an
d
W
iring
St
art
up
Se
ctio
n
[Installation and mounting]
Consider the size of the control panel, placement of the RCON controller, cooling and the like
when designing and manufacturing so that the ambient temperature is 0 to 55°C.
(If it has no fan unit, there is derating.)
When installing a simple absolute unit or SCON on the same control panel, design and
manufacture so that the ambient temperature is 0 to 40°C.
In particular, the performance may deteriorate when the temperature around the simple absolute
unit (battery) is too low or too high. Make sure that the temperature is as close to room
temperature as possible. (The recommended temperature is about 20°C.)
Item Specifications Item Specifications
Installation direction Vertical mounting (exhaust side on top)
Ambient
operating
temperature
With fan unit 0 to 55°C
Installation method DIN rail mounting Without fan unit 0 to 55°C (Note 1)
Installation conditions See figure below Ground Class D grounding
Note 1: If there is no fan unit, derating is available.
100mm or more
10mm
or more
100m
m
or
m
or
e
50m
m o
r m
ore
* Simple absolute units can be installed in close contact with each other.
Ceiling
RCON Simple
Absolute
Unit
Ceiling
10mm
or more
10mm
or more