132
The default value is set to 20mm (about 0.78 inches). To change the default
setting, type a new value.
3. Set left margin
This sets the left margin for ink printing. The left margin is the distance from
the left edge of the paper to the first text that is printed. The default value is
set to 20 mm (about 0.78 inches). To change the default setting, type a new
value.
4. Set right margin
This sets the right margin for ink printing. The right margin is the distance
from the right end of the printed text to the right edge of the paper. The
default value is set to 20mm (about 0.78 inches). To change the default
setting, type a new value.
5. Set page numbering
This sets the position where the page numbers are printed. The available
positions are "Upper left", "Upper middle", "Upper right", "Lower left", "Lower
middle", and "Lower right". To change the setting, press "Space" or
"Backspace".
6. Header
This is used to edit the header printed at the top of each page. Move to
"Header", and type the text that you want to be printed.
7. Footer
This is used to edit the footer printed at the bottom of each page. Move to
"Footer", and type the text that you want to be printed.
8. Distance between lines
This sets the distance between the printed lines. The default value is set to
150%. The distance can be anywhere from 100% to 300%. If you type a
value that exceeds this range, the Braille Sense U2 QWERTY says, "Out of
range. Value too large", and waits for you to type another value.
9. Confirm / cancel
To apply the settings, press "Enter" when "Confirm" is displayed. If you do
not want to apply a setting when "Cancel" is displayed, press "Enter".
5.5.3 Braille Paragraph Layout
