310
the remote folder list. When using this function, all retrieved files are saved
to the "flashdisk/download" folder. Use the following steps to retrieve a file:
1) Navigate the remote folder list using the same commands as in the File
Manager (see chapter 4).
2) PRESS "Space" to select the file you want to retrieve. Note that you can
select only files, not folders.
3) After selecting the file, press “Alt” to open the menu, and use “up arrow
button” or “down arrow button” to move to "Retrieve File", and press "Enter".
You can also activate this function directly by pressing "Ctrl-r".
4) As with copying and pasting, progress beeps are heard. If the file is larger
than 300 KB, progress messages are also spoken each time an additional
10% is completed. If the file is less than 300 KB, only progress beeps are
heard. When the transfer is complete, the unit announces, "xxx file retrieved",
where xxx is the name of the file. If the file does not transfer, Braille Sense
U2 QWERTY says, "xxx file not retrieved". When all of the selected files are
transferred, the message "Retrieve completed" is spoken, and you are
returned to the remote folder list.
13.2.3.4 New Folder
The "New Folder" function allows you to create a new folder in either the
local folder list or the remote folder list. Use the following steps to create a
new folder:
1) With the FTP service connected, from either the local or remote folder list,
navigate to the folder in which you want to create a new folder. Move
between the "remote folder list" and "local folder list" by pressing “Ctrl-o”.
Use normal folder and file navigation commands to move among the items in
the folder list.
2) Press “Alt” to open the menu, and use “up arrow button” or “down arrow
button” to navigate to "New Folder", and press "Enter". Or, you can activate
the "New Folder" function directly from the folder list by pressing "Ctrl-f".
3) An edit box appears and the unit prompts, "New folder name:". Type the
new folder name using ASCII characters, and press "Enter". If the folder is
