237
8) Press "Enter".
9) You are placed at the position in the file matching the percentage you
entered.
9.3.4.6 Set Start Point
A B repeat mode allows you to play a specific part of an audio file as many
times as you wish. This can be useful when learning a new language, and
you need to hear the same information in a file over and over again.
A B repeat mode requires setting start and end points for repetition.
To set a start and end point, follow these steps:
1) Press "p" at the position at which you want to set the start point.
2) Or, press “Alt” and move to "Position" by pressing “down arrow button”.
Press "Enter" on "Position". Move to "Set start point" by pressing “down
arrow button” and press "Enter".
3) The unit announces, "Set start point" and the file continue playing.
4) To set the end point, press "p" at the point where you want to end the
section for repetition.
Or, you can execute A B repeat mode by pressing the "Record button"
during playback.
1) Press "Record button" at the position at which you want to set the start
point.
2) To set the end point, press the "Record button" again at the point where
you want to end the section for repetition.
Note: You can only use the "Record button" to perform this function while a
file is playing. If playback is paused or stopped, the "record button" activates
the recording function.
After you have highlighted a section of a file using start and end points, A B
repeat mode allows you to play that specific part of the file as many times as
you wish. To set how many times a specified section repeat, go to "playback
settings" under the "settings" menu.
