323
To cancel adding the field, press “Tab” once more to move to the "Cancel"
button, and press "Enter". If you have added a new field, you get a message
saying that a new field has been added. The "created fields" list is shown
again. Now, "name" field appears in the list, with the form, "name (edit box,
pri) 1/1". Since only one primary key exists in a table, if you have set a field
as the primary key, the "Set primary key" check box is not shown in the "Add
field" dialog when you add another field.
Add the "telephone", "address", and "memo" fields by repeating steps 5
through 10 above. Note that you may want to set the "Field type" of the
"telephone" field to "number", "address" to "edit box", and "memo" to "multi
line edit box". Once you have added all of the fields you wish to add, press
“Tab” to move to the "Confirm" button, and press "Enter".
To change the name of a created field, move to the field name you want to
change in the "created fields" list. Press "m" or “Tab”, and enter on the
"Modify field" button. "Field name: (selected field name)" is displayed. Type
the new name for the field and press "Enter". Though you can change the
name of a field, it is not possible to change the properties of a field once it is
created.
To delete a created field, press “up arrow button” or “down arrow button”
repeatedly in the "created fields" list to move to the name of the field you
want to delete. Press “Tab” repeatedly to move to "Delete field" button and
press enter or press "d", to activate the shortcut key for the "Delete field"
button. You may also press “Tab” repeatedly to move to the "Delete field"
button and press "Enter".
To change the placement of a field in your table, move to the field that you
want to change in the "created fields" list. Press "p" or "n". Or press “Tab”
and enter on the"Previous field" button or "Next field" button to change the
location of the current field.
The "Add Table" dialog is closed, and the "table name" list box is shown
again. The newly created table is added to this list, and "address book 1/1" is
shown in the list. To close the "Table Manager" dialog, press “Tab” to move
to the "Close" button, and press "Enter". Or press "Alt-F4" to close the dialog.
Then, the "Search Records" dialog is opened, and the "name" field, the first