416
Sense U2 QWERTY's LAN port and the other end to a DSL modem. Be sure
the Ethernet port is turned on in the "Global Options" dialog. From the
connection types list under "Setup Internet", navigate to "ADSL" and press
"Enter".
The ADSL configuration dialog contains the following controls: connect list,
default, add, modify, delete, and close. You can move among the controls by
pressing “Tab” or "shift-tab". Within each control, you can move among the
items by pressing “down arrow button” or “up arrow button”.
The "connect list" contains the names of previously added connection
configurations. Select one by pressing "Enter" on it. Use the "Default" button ,
to set one of the configurations as the default ADSL connection.
Use the "Add" button to create a new ADSL connection configuration. The
"Add" dialog has three controls: a settings list, a "Confirm" button, and a
"Cancel" button. You can move among the three controls by pressing “Tab”
or "shift-tab".
The settings list contains the following: Connect name, ID, and Password.
You can move among the settings by pressing '“down arrow button” or “up
arrow button”. In the "Connect name" edit box, type the server host name or
something that identifies this connection to you. In the "ID" and "Password"
edit boxes, type the information in computer Braille. After entering the
necessary information, press "Enter" to save the connection settings, or tab
to the "Confirm" button and press "Enter". To cancel creation of the
connection configuration, tab to the "Cancel" button and press "Enter", or
press "Alt-F4".
Use the "Modify" button to change the information in a given connection
configuration. To modify a connection, select the connect name you want to
modify from the list, and press "Enter" on the "Modify" button. Or, press "Ctrl-
m" on the connection you wish to modify. The "Modify" dialog contains the
same items as "Add", and you navigate and enter information the same way.
