315
COM ports are not set to COM 5 and COM 6. The COM ports used can vary
from computer to computer.
17) Press “Tab” to get to the Finish button, and press "Enter" to activate it.
18) You will then be taken back to the Bluetooth device settings dialog.
Press Ctrl-Tab twice to focus the COM ports tab control.
19) Press “Tab” to get to the list of COM ports, and press the Down Arrow to
move through the list of COM ports to make sure that they match the COM
ports that were mentioned when you completed the Bluetooth device wizard.
You should hear your first COM port, then the direction, and the name. After
you press "down" Arrow again, you should hear the next COM port, the
direction, and name. For example, when you press the "down arrow" key the
first time, you might hear, "COM 5 Outgoing Windows CE Blue Tooth Serial".
When you press the "down arrow" key a second time, you might hear, "COM
6 Incoming Windows CE".
20) Tab to the OK button, and press Enter.
You have now setup the Braille Sense U2 QWERTY and the computer.
However, you must properly setup Window-Eyes in order to use the Braille
Sense U2 QWERTY as a Bluetooth Braille display.
13.2.5.3 Setting up Window-Eyes
1) Press "ctrl-backslash" to open the Window-Eyes Control Panel.
2) Press "alt-f" to open the File menu.
3) Press the "up arrow", or "down arrow" to move to Select Braille Display,
and press "Enter". Or, just press B to open the Select Braille Display dialog
without using the Arrow Keys.
4) Press the "down arrow" or the letter b until you hear Braille Sense U2
QWERTY.
5) Press “Tab” to get to the COM port list box
6) Select the COM port that was given as the outgoing COM port when you
setup the computer to interact with the Braille Sense U2 QWERTY via
Bluetooth.
7) Press "Enter"
