308
file is pasted successfully, the unit also announces, "Paste completed", and
you are returned to the remote folder list.
Use the following steps to copy a file from the remote folder list to the local
folder list:
1) Navigate the remote folder, just as you would in the File Manager. For
information on how to navigate the File Manager, please refer to chapter 4 in
this manual.
2) Select the files that you want to copy by pressing "Space", you can open
the FTP menu by pressing “Alt”, and use “up arrow button” or “down arrow
button” to navigate to "Copy", and press "Enter". You can also activate this
function by pressing "Ctrl-c". Note that you can only copy files, you cannot
copy folders, to send to the local folder.
3) After you have activated the "Copy" function, the Disk list appears as it
does in the File Manager. You are placed on "flashdisk" by default. However,
if you have an SD card or USB memory stick inserted, you can navigate to
those disks by pressing “up arrow button” or “down arrow button”.
4) After entering a disk, open the menu by pressing “Alt”. Then, move to
"Paste" with “up arrow button” or “down arrow button”, and press "Enter".
You can also activate this function by pressing "Ctrl-v". If the file is larger
than 300 KB, progress messages are spoken each time an additional 10% is
completed. If the file is less than 300 KB, only progress beeps are heard.
5) When the file is pasted successfully, Braille Sense U2 QWERTY displays
the message, "xxx file pasted", where xxx is the name of the file. If the file is
not pasted successfully, "xxx file not pasted" is displayed. After the file is
pasted successfully, the unit also announces, "Paste completed", and you
are returned to the local folder list.
13.2.3.2 Send To
This function allows you to send files from the local folder list to the remote
folder list. Note: this option is only available in the local folder list. This is very
similar to the copy and paste function with a couple of notable differences.
